Category Archives: iTunes Tricks

How to Fix iTunes Error When Installing iOS 10 Beta

To a part of iOS users. They are glad to upgrade their iOS devices to latest versions. iOS beta have published for a short time. So there is a part of users have upgrade to it. But the problems on here is iTunes error when installing iOS 10 beta. So how can we fix that case in common way. Below we can get answers.

When Does iTunes Error Occur?

The error occurs when users are using iTunes to update their iDevices to the new iOS 10 beta while restoring from the backup. The error pops up, saying, “The iPhone/iPad could not be restored. An unknown error occurred.”

However, when updating from iOS 9 to iOS 10 previously, it was okay to upgrading to the new software and restoring from the backup at the same time.

iOS-10

How shall we solve iTunes error when installing iOS 10 Beta

Obviously, this error is new to the users. And some users tried to fix it with usual methods,
such as changing USB ports or cables, reboot, switching to DFU mode. None of these methods works.

If you have verified that neither USB connection nor DFU mode can help, then you should try the following troubleshooting tips to fix the Error.

Method 1: Xcode 8 on Mac
If you try to update to iOS 10 beta with iTunes on Mac, you should make sure that the latest version of Xcode has install on your Mac. Apple has reminded users that “you must have the latest version of Xcode 8 installed on your Mac before using a Restore image to install iOS or tvOS beta software on a device”.

Therefore, before upgrading your iOS devices to iOS 10, you might want to install Xcode 8 on the Mac from the Apple developer portal or Mac app store so that the error won’t occur during the update.

Method 2: Backup and Clean Restore of iOS 9.3.2
If the iTunes Error has occurred before you know the importance of Xcode 8, you can try backing up the iOS device and doing a clean restore of iOS 9.3.2 to fix the error.
Step 1: Make a backup of your iOS device. Then do a restore to the latest public release, which is iOS 9.3.2.

Step 2: Before restoring from the personal backup, use the IPSW file that is downloaded from Apple’s Developer to clean restore iOS 10.
Step 3: After iOS 10 beta has installed, you can then restore the backup.
If the problem continues, you should perform the update of iOS 10 beta directly on your device.

Method 3: How to use iCareFone to fix iOS system error

iphone care pro-1
Step 1: Download and install iCareFone on your Mac computer.
Step 2: To launch iCareFone on your computer, then choose “repair operating system”. The program will detect your iDevice.

Step 3: Download Firmware package manually, click “Browse” to choose a path in your computer. Then select repair mode to repair your iOS system without data lost.

In the end, have you got have to fix iTunes error when installing iOS 10 beta? If you have any trouble in following the guide, welcome to leave it on our site comment section.

 

 

Save

Save

Save

Save

How to Unlock iTunes Backup Password on iPhone 7

When someone makes a backup of its iPhone 7, she/he does not ever want others access to this backup. Accordingly, it may be worthwhile if you encrypt iTunes backups. Thanks to password protection to access the backup, no one can get your data including contacts, location data, calendar and other sensitive information.

As in the other case, it is now that previous backups remain encrypted. All iPhone 7 backups on iTunes are unencrypted. If you no longer have access to old backups since you may have forgotten the password, fortunately you can remedy with a software here:

The software is Tenorshare iPhone Backup Unlocker and it can be downloaded here. Download the software and install it. Once you do that, you can start it and perform the following steps to decrypt your encrypted backup:

iphone-7-backup-password-recovery

1. Launch the software and click “Add”. Now looking from your encrypted file.
2. Then select one of the Attack Types, it is used to crack the password.
3. Now you just have to click “Start” and wait a few minutes until you have their password.

Tips:

1. How to encrypt the backups of your iPhone 7:

1. Open iTunes on your computer or Mac.
2. Connect your iPhone to your PC or Mac.
3. Under Device should now show up your iPhone 7. Click on it in order to open your phone.
4. Now click Overview. Navigate from here on Options and select the box from “iPhone backup encrypt”.
5. Now you must enter a password twice.
6. Now click “Set Password.”
That’s it. From now on all your backups on iTunes are encrypted.

2. How to decrypt your iPhone 7 backup password:

1. Launch the iTunes on your Mac or PC.
2. Reconnect your iPhone 7 with computer. It should be automatically detected and loaded.
3. Select your iPhone. Now opens an overview of the entire contents.
4. Navigate from here to the point options, here you make simply uncheck “iPhone encrypt backup” back away.
5. Now you have to delete the set password to confirm. For this purpose give it a simple and confirm that you no longer encrypt iTunes backup password.
6. Click “Confirm”.
Now you have decrypted for iPhone 7 backups.

How to fix iTunes error 0×80090326 on Windows XP

“When logging on to iTunes on Windows XP, I got the following message ‘An unknown error occurred (error 0×80090326)’. Which means that I can’t buy content, watch purchased movies and TV shows, play DRM-protected content, backup, update or sync on my computer anymore? Does anyone know how to fix it?”

Windows XP users can open the iTunes program, but can’t login in to achieve more services, such as stream anything from the iTunes Store includes movies you haven’t downloaded. Users are mainly reporting they get a message about “error 0×80090326” . Restarting the Windows XP cannot t fix the problem, neither does upgrading to another version of the iTunes program.

itunes-error-0x80090326-on-windows-xp

Many users try to troubleshoot their machines, but it is thought that Apple changed something to do with the secure connection and did not compatible with Windows XP.

Try installing and reinstalling iTunes, Windows XP review and repair, repair of QuickTime and iTunes, uninstalling anti-virus, turned off firewall. But if nothing works at last. You have nothing to do but change your computer.

A cheaper, but better idea is just to ditch Windows XP. Operating system upgrades are theoretically possible as long as your hardware supports it. You can try to upgrade your computer to the Windows 7 which has not too many requirements on hardware supports, and then you can ignore the iTunes error 0×80090326 on your computer.

We don’t have a good idea to fix iTunes error 0×80090326 on Windows XP, However, these alternative methods can definitely help you, another computer or same computer with high version of Windows system. Or you can login in iTunes store directly use your iPhone, iPad, iPod touch.

Top 3 Free iTunes Data Recovery Software

There are a variety of reasons that cause data loss on your iOS devices, user error involving accidental deletions, physical damage, a jailbreak went wrong, new iOS upgrade and various other reasons. Have you lost or deleted or erased important data from iPhone/iPad/iPod? Don’t worry, if your have synced your iDevice to iTunes, you still can recover those data with an iTunes Data Recovery Software.

Here we list you top 3 free iTunes data recovery software that are very popular in this field.

1. Tenorshare iTunes Data Recovery


Developer: Tenorshare, Inc.

Tenorshare iTunes Data Recovery Software is an iPhone Backup Extractor with free trial version that can help you recover lost or deleted messages(WhatsApp messages, Viber messages, Tango messages included), notes, contacts, photos, videos, voice memos and other types of data from iTunes backup.(Tips: the paid version only sales $39.95)

Key Features:

  • Totally free trial for a limited time.
  • Automatically load and import iTunes backup files on your computer.
  • Scan and preview 19 types of files from iTunes backup file of iPhone/iPad/iPod.
  • Recover lost data selectively after iOS jailbreak, upgrade or factory settings.
  • User-friendly interface, simple operations & fast data recovery.

2. iPubsoft iTunes Data Recovery

ipubsoft-itunes-data-recovery
Developer: iPubsoft, Inc.

iPubsoft iTunes Data Recovery offers you an easy way to recover lost/deleted iPhone photos, videos, notes and other kinds of files under the premise that you have an iTunes backup files of your iPhone on the computer. This software also has a free trial version, but the paid version sales $69.95.

Key Features:

  • Recover up to 12 types of files for iPhone.
  • Get back lost data caused by various reasons
  • Support iOS 9 and the latest iPhone 6/6S.
  • Versatile file preview, file search and file filter options.

3. iStonsoft iTunes Data Recovery

istonsoft-itunes-data-recovery
Developer: iStonsoft, Inc.

iStonsoft iTunes Data Recovery is able to recover contacts, SMS, call history, voice memos, photos and more as long as you synced your iPhone/iPad/iPod Touch with iTunes before. You also can get a free trial version, but the price of paid version is same as iPubsoft iTunes Data Recovery.

Key Features:

  • Support to recover 11 File Types.
  • Work for almost all models of iPhone, iPad and iPod Touch.
  • Retrieve data lost after jailbreak, iOS upgrade, factory setting.
  • Simply within 3 steps to recover whatever you thought it would lost forever.

How to Fix iTunes Download Error Tap to Retry

There are some iPhone users complained that when they try to download songs, movies from iTunes on iPhone, they got a message like “Download Error. Tap to retry” pop-up on the iTunes. When we meet this situation, we feel confused because there is no other abnormal problem on our iPhone. So how this happen and how to fix iTunes download error tap to retry.

What cause iTunes download error

  1. Lack of internal storage.
  2. Slow network or lost connection with the internet.
  3. Blocked by Firewalls.

Methods to solve iTunes download error on iPhone 6s/6/5s/5

Method 1: Check the iPhone’s memory. You may need to check your available memory on your iPhone first, make usre that there is enough space for new content.

Method 2: Check the iPhone’s network. Make sure that your iPhone is connected with available WiFi, or try to reconnect the Internet.

Method 3: Check the iPhone’s Firewalls. Check if there are any third-party antivirus software block your iTunes’s download, suggest you to turn off all your antivirus software before download songs or movies on iTunes.

Method 4: If the steps above cannot fix iTunes download error “tap to retry”, you may need to download the content on PC. First, connect iPhone to your computer, launch iTunes, go to “purchased” under “store”, select the “Available Downloads” and download the medias you have purchased to your iPhone.
Note: please make sure that the iTunes on your computer has updated to the newest version.

Now the iTunes download error of “Tap to Retry” on your iPhone is fixed with these 4 methods.

How to Fix “iTunes Cannot Read Contents of the iPhone” Issue

Dear all,
When I try to connect my iPhone 5C with computer and the iTunes pop up a message like “iTunes cannot read the contents of the iPhone ‘iPhone 5C’, Go to the summary tab in iPhone preferences and click Restore this iPhone to factory setting.”.
please advice how to resolve this issue.

How to fix iTunes cannot read iPhone contents

To fix the issue that iTunes cannot read contents of iPhone, you may need to reinstall your iTunes first, because sometimes that issue is caused by iTunes program error, so you’d better to reinstall the latest iTunes on your computer and try to connect iTunes again.

If the simple method above doesn’t work, then you can try to delete one song and turn off/on your iPhone, also try to connect with iTunes and see if it does work.

If it is really very unfortunate and the iTunes still cannot read contents of your iPhone, I am sorry to tell you that it is time to restore your iPhone to factory settings. Just click “OK” button when the error message “iTunes cannot read contents of the iPhone” pops out and wait. Or tap “Setting”>>“General”>>“Reset” >>“Erase all contents and settings” to restore your iPhone.

But note that factory settings will erase all data on your iPhone, but don’t worry, with an iPhone Data Recovery Software from Tenorshare, you can recover the lost data directly from iPhone, and you also can fix the problem of iTunes cannot read your iPhone contents, which is excellent.

The methods above are very simple, but if you want to know some more complex and effective methods, you can read this article: How to Fix iTunes can’t read my iPhone

How to Extract iPhone Backup Files via iTunes 12.2.2.1

iTunes actually is a media player and library software for iPhone/iPad/iPod, but I believe that almost all the Apple users know iTunes also is a common backup tool. When iTunes recognized your iOS devices, it can backup your data automatically.

Now the newest version of iTunes is iTunes 12.2.2.1, if you have installed iTunes on your computer, when you launch it and it will tip you to upgrade to the newest version. So if you lose your iPhone data for some reasons such as accidentally deleted, factory reset, jailbreak etc. How to extract iPhone backup files via iTunes 12.2.2.1 to recover lost data?

How to Recover iPhone Lost Data from iTunes 12.2.2.1

extract iPhone data via iTunes

  • 1. Launch iTunes 12.2.2.1 and connect your iPhone to computer with USB porter.
  • 2. Be patience to wait until iTunes 12.2.2.1 recognize your iPhone/iPad/iPod.
  • 3. Right-click on the iPhone icon and click “Restore from Backup”.
  • 4. If you have synced your iPhone with iTunes recently, you will have several backup entries can be chosen. Select the latest backup entry appearing under the most recent date and click “Restore”.
  • 5. After the restore is complete, you will have your original iPhone data recovered.

But before you recover iPhone lost data from iTunes, you should know that the data existing on your iPhone but not on iTunes will be overwritten and can’t be restored anymore. This is a drawback of iTunes, so how can we recover the data we want from iTunes without lose the new data? There is a software named iTunes Data Recovery can help you to extract iTunes backup selectively.

How to Extract iTunes Backup with iTunes Data Recovery

Step 1. Download, install and launch Tenorshare iTunes Data Recovery, select and import iTunes backup file to the iTunes Data Recovery.
Step 2. After a few minutes to see different categories of files, scan and preview the backup files.
Step 3. Tap “Recover” and choose a path for the recovered data.

Now you can recover the files you want from iTunes and no need to lose the other data, it is perfect.

How to restore data from itunes when itunes request factory setting

Have you met similar situation like this? When you connect your iPhone, iPad, iPod to computer and want to restore data from iTunes, it ask you to do factory reset, and all data in your device will be erased. This is annoying, if you follow the guide,your data will be lost, but if not, you can’t use itunes to restore iTunes data normally.And although you reset your device, this request will keep pop out, because this kind of situation is caused by ADB driver error.

iTunes cannot restore backup

iTunes cannot restore backup

 

How to recover lost data from iTunes backup when iTunes can’t connect your device

Before you get method to fix ADB driver error for iTunes, I think you are so hurry to want to restore data from iTunes backup. But how to restore data from iTunes data without iTunes?

Except for iTunes, we can make use of some other bette program to restore iPhone, iPad, iPod data from backup file.

iTunes Data Recovery can help you get all iOS devices backup data back. Automatically detect all your iTunes backup files and extract data to PC .Besides, this program can be used as iTunes backup file extractor and viewer, you can view all data in backup file including contacts, text messages, photos, videos, call history, app documents and voice memos, etc.  Let’s know how does it work.

Firstly, you need to download and install iTunes Data Recovery to your computer, when you launch it ,you can see this program will import iTunes backup files in your computer automatically. If you can’t see your wanted backup files, you can import them  manually.

itunes data recovery1

Then, choose the backup you want to restore, click next to view specific data in then backup. Here you can see what data are in the backup.

 

itunes data recovery

Finally, choose the files you want to restore, well you can get back your iTunes backup data without iTunes.

itunes data recovery

How to view and transfer iTunes backup data for iPhone 6/6 Plus

iOS devices can’t live without iTunes

When you have been familiar with your iOS devices including iPhone, iPad,iPod, you’ll find that, you can’t use them freely if there is no iTunes. Although you can use some the 3rd-party iOS device management programs, indeed, those programs also work with iTunes.

Honestly, iTunes is a useful and practice program for iOS deivce to manage data, download apps,download music and video, backup and restore device data, upgrade system etc. Generally, for common users, they often use it to back up their iPhone, iPad,iPod data to compuer or iCloud.

Want to view or transfer specific files from iTunes backup data on computer?

iTunes backup file is packed and encytpted for privacy security. If user want to view or transfer specific files such as photos, text messages, contacts, videos, in iTunes backup file, it is impossible for common users. They just can restore data from iTunes for their iPhone 6/6 Plus.

However, we still have possibility to view iTunes backup data for iPhone 6/6Plus.

view iphone 6 itunes backup data

Tutorial for extract iPhone 6/6 Plus iTunes backup

Firstly, we need to know where the iTunes backup files store in computer. Practically, iTunes is installed to drive C:/ defaultly. So, the backup files also are store in drive C:/ as well.

For Windows computer users, the location where you can find iTunes backups of the data on your iPhones depends on the version of Windows being used:

• For Windows XP:
\Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\

• For Windows Vista, 7, or 8:
\Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\

Users of Mac systems, on the other hand, can find the backups they’ve created using iTunes in a location common to all versions of the Mac operating system.

• For Mac:
~/Library/Application Support/MobileSync/Backup/

Then, since you have find iTunes backup files, you need to get a tool to help you extract iPhone 6/6 Plus backup file from iTunes.

Tenorshare iTunes Data Recovery(Win/Mac) enables us to recover all files from iPhone, iPad and iPod Backup files. This small utility will help you recover lost or deleted contacts, text messages, photos, and even WhatsApp, Viber and Tango messages from iPhone, iPad and iPod by extracting iTunes backup.

After installing iTunes Data Recovery on your computer, just launch this program, it will detect your iTunes backup files in computer. If you can’t see your wanted backup files in the list, you can import it from the known location by yourself.

When you have saw your backup files, just choose it and click “Recover”, the program will extract the files to specific data with classifying. Hey,look, you can view your iPhone 6/6 Plus, juse choose what you want to transfer to computer.

What’s more, this program can help you restore iOS Device data when iTunes can’t help you restore lost data.